離心泵應該如何保管

　　①尚未安裝好的泵在未上漆的表面應涂覆一層合適的防銹劑，用油潤滑的軸承應該注滿適當的油液，用脂潤滑的軸承應該僅填充一種潤滑脂，不要使用混合潤滑脂。
　　① not yet installed pumps in unpainted surface shall be coated with a layer of suitable anti-rust agent, oil lubricated bearings should be filled with the appropriate oil, with grease lubricated bearings should only be filled with a kind of grease, do not the use of mixed grease.

　　②短時間泵人干凈液體，沖洗，抽吸管線，排放管線，泵殼和葉輪，并排凈泵殼，抽吸管線和排放管線中的沖洗液。
　　② short-term pumped clean liquid, washing, suction pipes, discharge pipes, pump casing and impeller, side by side, the net pump casing, suction and discharge pipelines pipelines in the rinse solution.

　　③排凈軸承箱的油，再加注干凈的油，徹底清洗油脂并再填充新油脂。
　　③ row of net bearing boxes of oil, coupled with clean injection of oil, grease thoroughly cleaned and re-populate the new grease.

　　④把吸人口和排放口封起來，把泵貯存在干凈，干燥的地方，保護電機繞組免受潮濕，用防銹液和防蝕液噴射泵殼內部。
　　④ the suction seal population and discharge up to pump stored in clean, dry place, protecting motor windings against moisture, with anti-rust liquid and corrosive liquid jet pump inside the shell.

　　⑤泵軸每月轉動一次以免凍結，并潤滑軸承。
　　⑤ pump shaft rotation once a month so as not to freeze, and lubricated bearings.