PW臥式排污泵概述
PW horizontal sewage pump Overview
PW、PWF型污水泵是單級、單吸、懸臂式離心污水泵。泵吸入口為軸向水平方向，泵排出口可根據需要裝成水平或垂直方向。
PW, PWF-type water pump is a single-stage, single suction, cantilever type centrifugal water pumps. The level of suction pumps for the axial direction, pump discharge outlet may be fitted into the needed horizontal or vertical direction.
PW臥式排污泵結構形式
PW Horizontal sewage pump structure
PW、PWF主要由泵蓋、泵殼、葉輪、軸封、軸、和托架等零部件組成。軸封采用新穎的雙端面機械密封結構形式。泵與電機安裝在共同底盤上，通過彈性聯軸器由電機直接驅動。
PW, PWF mainly by the pump cover, pump casing, impeller, shaft seal, shaft, and bracket the composition of such components. Seal using novel double-end mechanical seal structure. Pump and motor mounted on a common chassis, through the flexible coupling from the motor direct drive.
PW臥式排污泵優點
PW advantages of horizontal sewage pump
該泵具有效率高、節能顯著、運行平穩、性能可靠、維修方便等優點。
The pump has high efficiency, energy-saving significantly, smooth operation, reliable performance, easy maintenance and so on.
PW臥式排污泵用途
PW horizontal sewage pump use
1、 PW普通型污水泵可輸送污水、含有懸浮固體顆粒、長纖維物質及生活用廢水。PW型泵體為鑄鐵材質介質溫度不超過80℃。
1, PW ordinary type sewage pump can deliver water containing suspended solid particles, long fiber material and water used in daily life. PW-type pump for the cast iron medium temperature does not exceed 80 ℃.
2、 PWF型耐腐蝕污水泵可輸送帶有酸性、堿性或其他腐蝕性的污水，廣泛應用于化工、石油、輕工、食品、制藥、釀造、環保及污水處理等行業。PWF型的泵體及過流部件采用ZC1Cr18Ni9Ti材質制造。如用戶有特種需要，本公司可生產過流部件為不銹鋼306或不銹鋼316L的特種材質水泵。介質溫度不高于80℃，特種泵介質溫度可達200℃。
2, PWF-type corrosion-resistant conveyor belt with water pump may be acidic, alkaline or other corrosive sewage, is widely used in chemical, petroleum, light industry, food, pharmaceutical, brewing, environmental protection and sewage treatment industries. PWF-type pump and cross-stream components manufactured using ZC1Cr18Ni9Ti materials. If users have special needs, the company can produce over-current components of stainless steel 306 or stainless steel 316L special material pumps. Medium temperature is not higher than 80 ℃, special pumps medium temperature up to 200 ℃.
|
